Woodstock W1099 Especificações

COPYRIGHT © BY WOODSTOCK INTERNATIONAL, INC. TX 4-085-998 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPEOR FORM WITHOUT THE WRITTEN

- 8 - Woodstock Intl., Inc. D2796ADJUSTMENTSThe side stops serve three purposes: (1) they positioneach work piece square to the fence and one another

- 9 - Woodstock Intl., Inc. D2796ADJUSTMENTS4. Insert a drawer side under the front clamp. Thispiece will be vertical. Adjust the height so the topend

Figure 14 shows the template set back an additional 1/8" fora 1" thick board. The inside faces are showing. - 10 - Woodstock Intl., Inc. D2

- 11 - Woodstock Intl., Inc. D2796ADJUSTMENTSNOTICEEnsure that the front edge of the template is par-allel to the edge of the vertical workpiece. Toma

- 12 - Woodstock Intl., Inc. D2796ADJUSTMENTSFENCE ADJUSTMENTOnce the side stops have been accurately set up, thefence needs to be properly adjusted.

- 13 - Woodstock Intl., Inc. D2796ADJUSTMENTSFENCE ADJUSTMENT TABLEThickness of Vertical Piece (Measurement x" from Fig.16)Distance from Edge of

- 14 - Woodstock Intl., Inc. D2796OPERATIONSFigure 18 shows the dovetail jig set up for use. The inside faces of the boards are showing.OPERATIONSYou

Figure 20 shows a finished drawer and 2 sides ready to be joined.Figure 19 shows the dovetail jig in use.- 15 - Woodstock Intl., Inc. D2796OPERATIONST

- 16 - Woodstock Intl., Inc. D2796OPERATIONSHALF-BLIND JOINTS ON RABBET-ED DRAWER FRONTSDrawer fronts that have been rabbeted around the insideedge t

- 17 - Woodstock Intl., Inc. D2796OPERATIONSTEAR-OUTWhen cutting across the grain of the wood, tear-out orsplintering may occur when the router bit ex

- 18 - Woodstock Intl., Inc. D2796OPERATIONSFigure 25. Adjust fence away from template.Figure 26 shows offset edges.Figure 27. Edge of vertical piece

- 19 - Woodstock Intl., Inc. D2796OPERATIONSUNEVEN FITIf the side piece fits either excessively or protrudes atone edge and not the other, the fit is

- 20 - Woodstock Intl., Inc. D2796OPERATIONSLIMITED WARRANTYWoodstock International, Inc. (Woodstock) warrantsthis product against defects in workman

- 21 - Woodstock Intl., Inc. D2796PARTS5523238238231777883141414141612A212111111818181816169222442910161317776613131313191919192020202022222222PARTS D

- 22 - Woodstock Intl., Inc. D2796PARTSD2796 DOVETAIL JIGOverall Dimensions:Height ...

NOTES- 23 - Woodstock Intl., Inc. D2796

- 1 - Woodstock Intl., Inc. D2796ASSEMBLYOPERATIONSPARTSADJUSTMENTSSAFETYINTRODUCTIONTABLE OF CONTENTSINTRODUCTION ...

- 2 - Woodstock Intl., Inc. D2796INTRODUCTIONINTRODUCTIONWoodstock International, Inc. is proud to offer theModel D2796 12" Dovetail Jig. Suitab

- 3 - Woodstock Intl., Inc. D2796SAFETY1. KNOW YOUR POWER TOOL. Read theowner’s manual carefully. Learn the tool’s appli-cations and limitations, as w

- 4 - Woodstock Intl., Inc. D2796ASSEMBLYRemove the items packed in the carton. It may be agood idea to save the carton and packing material incase t

- 5 - Woodstock Intl., Inc. D2796ASSEMBLYThe Model D2796 is designed to produce 5⁄8" half-blinddovetail joints with a router, 7/16" O.D. gui

- 6 - Woodstock Intl., Inc. D2796ASSEMBLYIt is important to plan your work before starting!If joining multiple pieces for a drawer or series of draw-

- 7 - Woodstock Intl., Inc. D2796ADJUSTMENTS1. The hand levers clamp your workpiece in place. 2. The fence knobs hold the fence in place. Loosenthese